产品分类/ Products
- HTA8128 内置升压的60W立体声D类音频功放
- AU6815A集成音频 DSP 的 2×25W 数字型 Cl
- HTN78A3 6V~140V输入，3A实地异步降压变换器
- HT81297 18W内置升压单声道D类音频功放
- NS2583 同步升压型 2A 双节锂电池充电管理 IC
- NLC47022带NTC功能和电量均衡功能电流2A 5V异
- PT2027 单触控双输出 LED 调光 IC
- HT316C兼容HT326C防破音功能免电感滤波2×20WD
- HT3386兼容TPA3118 2×50W D类立体声音频功放
- NS8220 300mW 双声道耳机音频放大器
- HT6875 2.8W防削顶单声道D类音频功率放大器
- HT77221 HT77211 4.0V~30V输入，2A/1.2A同步降压变换器
- NS4117X 系列 外置 MOS 管开关降压型 LED 恒流控制器
- HT71663 13V,12A全集成同步升压转换器
低噪声运算放大器
产品名称：AXOP39062/4/S 25MHz RRlO Operational Amplifiers(Dual/Quad)
型号： AXOP39062/4/S
产片介绍：Excellent THD+N 100dB Excellent SNR 110dB Rail-to-rail input and output Low input offset voltage: +0 5mV typ Unity-gain bandwidth:25MHz Low quiescent current (per opamp): 400μA typ Operational at supply voltages as low as 1 5V Easier to stabilize with higher capacitive load due to resistive open-oop output impedance Shutdown function(AXOP39062S and AXOP39064S)
产片介绍：Excellent THD+N 100dB Excellent SNR 110dB Rail-to-rail input and output Low input offset voltage: +0 5mV typ Unity-gain bandwidth:25MHz Low quiescent current (per opamp): 400μA typ Operational at supply voltages as low as 1 5V Easier to stabilize with higher capacitive load due to resistive open-oop output impedance Shutdown function(AXOP39062S and AXOP39064S)
┄┄┄详细介绍┄┄┄
Description
The AXOP39062 (dual), and AXOP39064 (quad) are dual and quad low voltage (1.5V to 5.5V)
operational amplifiers (opamps) with rail-to-rail input and output swing capabilities. These
devices are very suitable for applications where low voltage operation, a small footprint,
and high capacitive load drive are required. AXOP39062S and AXOP39064S are with Shutdown function.
Features
▪ Excellent THD+N 100dB
▪ Excellent SNR 110dB
▪ Rail-to-rail input and output
▪ Low input offset voltage: ±0.5mV typ
▪ Unity-gain bandwidth: 25MHz
▪ Low quiescent current (per opamp): 400µA typ
▪ Operational at supply voltages as low as 1.5V
▪ Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
▪ Shutdown function (AXOP39062S and AXOP39064S)
Applications
▪ Infotainment system
▪ HVAC: heating, ventilating, and air conditioning
▪ Motor control
▪ Wearable devices
▪ Sensor signal conditioning
▪ Power modules
▪ Active filters
Table 1 Device Summary
1 Block Diagram and Application Circuit
Figure 1 Block Diagram
Figure 2 Typical Application Circuit (Stereo Sound Input Amplifier)
2 Pin Description
2.1 AXOP39062A/B/C/D Pinouts
2.2 AXOP39062SA/B Pinouts
2.3 AXOP39064A/B Pinouts
2.4 AXOP39064SA/B Pinouts
3 Electrical Specifications
3.1 Absolute Maximum Ratings
3.4 Electrical Characteristics
For Vs = (V+) - (V-) = 5V at Ta = 25°C, RL = 10kΩ connected to Vs/2, Vcm = Vs/2,
and Vout = Vs/2 (unless otherwise noted).
4 Functional Description
4.1 Overview
The AXOP3906x devices are a family of low power, rail-to-rail input and output opamps. These
devices operate from 1.5V to 5.5V, are unity gain stable, and are designed for a wide range of
applications and used in virtually any single supply application.
The AXOP3906x devices are a family of low power, rail-to-rail input and output opamps. These
devices operate from 1.5V to 5.5V, are unity gain stable, and are designed for a wide range of
applications and used in virtually any single supply application.
4.2 Rail to Rail Input
The input common mode voltage range of the AXOP3906x family extends 100mV beyond the
supply rails for the full supply voltage range of 1.5V to 5.5V. This performance is achieved with
a complementary input stage: a N-channel input differential pair in parallel with a P-channel
differential pair, as shown in Figure 1. The N-channel pair is active for input voltages close to
the positive rail, typically (V+)-1.4V to 200mV above the positive supply, whereas the P-channel
pair is active for inputs from 200mV below the negative supply to approximately (V+)- 1.4V.
There is a transition region, in which both pairs are on. Within this transition region, PSRR,
CMRR, offset voltage, offset drift, and THD can degrade compared to device operation outside
this region.
4.3 Rail to Rail Output
Designed as a low power, low voltage operational amplifier, the AXOP3906x series delivers a
robust output drive capability. A class AB output stage with common source Mosfets achieves
full rail-to-rail output swing capability. For resistive loads of 10kΩ, the output swings to within
10mV (typ) of either supply rail, regardless of the applied power supply voltage. Different load
conditions change the ability of the amplifier to swing close to the rails.
4.4 Overload Recovery
Overload recovery is defined as the time required for the opamp output to recover from a
saturated state to a linear state. The output devices of the opamp enter a saturation region
when the output voltage exceeds the rated operating voltage, because of the high input
voltage or the high gain. After the device enters the saturation region, the charge carriers
in the output devices require time to return to the linear state. After the charge carriers
return to the linear state, the device begins to slew at the specified slew rate. The overload
recovery time for the AXOP3906x family is approximately 300ns.
4.5 EMI Rejection
The AXOP3906x uses integrated electromagnetic interference (EMI) filtering to reduce
the effects of EMI from sources such as wireless communications and densely populated
boards with a mix of analog signal chain and digital components.
4.6 Shutdown
The AXOP3906xS has shutdown function. The amplifiers can be shut down by enabling
the respective shutdown pin.
上一篇：AXOP39061 25MHz RRIO Operational Amplifiers(Single)
下一篇：AXOP3406x 40V 25MHz RRIO Operational Amplifiers (Dual/Quad)
